Differences

This shows you the differences between two versions of the page.

--- bpq32-web-server-terminal [2026/02/23 18:55] – n3vem
+++ bpq32-web-server-terminal [2026/02/27 14:28] (current) – n3vem
@@ Line 34: / Line 34: @@
 If you are accessing your node from the Pi you installed it on, just fire up the web browser and go to:
-localhost:8008
+//localhost:8008// (where 8008 is the HTTPPORT defined in your config)
-If you are accessing it from another computer on the same network, and you entered the correct LOCALNET you can open up your broswer, and enter the IP address of the Pi, followed by the port, like so:
+If you are accessing it from another computer on the same network, and you entered the correct LOCALNET you can open up your browser, and enter the IP address of the Pi, followed by the port, like so:
-.168.1.100:8008
+//192.168.1.100:8008// (where the IP address is the address of your node, and 8008 is the HTTPPORT defined in your config)
 If you aren't sure of the IP address of your Pi, from the PI's command line you type: