Differences

This shows you the differences between two versions of the page.

--- qttermtcp-node [2026/02/23 13:36] – n3vem
+++ qttermtcp-node [2026/02/23 16:04] (current) – n3vem
@@ Line 4: / Line 4: @@
 If you followed the FARPN getting started tutorials, you should be able to find a shortcut to QTTermTCP in the applications menu on your Raspberry Pi or whatever other device you installed your packet station software onto.
 {{:qttermtcp.png?400|}}
 You'll want to first navigate to Setup -> Hosts -> and Choose one of the "New Host" lines
 {{:qttermtcpnewhost.png?400|}}
@@ Line 25: / Line 27: @@
 </code>
 **Session Name**: local (you can name this anything you want - local just makes sense)
 {{:qttermtcphostvalues.png?400|}}
 Click Save when done!
-Back at the main screen, click connect, and choose the connection you just created.  You should be rewarded with a prompt for you node in the bottom half of the window, and in the top you should start seeing some packet activity scrolling by. The volume of activity in the top will depend on band, mode and conditions, since this is what your station is receiving!  Things in red are what your station sends, so if you set up beacons in your config file, or elsewhere, you'll see those periodically get sent.
+Back at the main screen, click connect, and choose the connection you just created.  You should be rewarded with a prompt for your node in the bottom half of the window, and in the top you should start seeing some packet activity scrolling by. The volume of activity in the top will depend on band, mode and conditions, since this is what your station is receiving!  Things in red are what your station sends, so if you set up beacons in your config file, or elsewhere, you'll see those periodically get sent.
 {{:qttermtcpconnected.png?400|}}
@@ Line 49: / Line 49: @@
 play around with the options and see what happens!
 A nice cheat sheet of commands for you as the SYSOP is [[https://ham.packet-radio.net/packet/bpq32/bpq32-guide/bpq-user-and-sysop-commands.pdf|available here]], thanks to PY2BIL
+For additional "things to do" now that you have this up and running, check out our "[[now-what|Now What?]]" section.