Differences

This shows you the differences between two versions of the page.

--- tutorial-packet-on-pi [2025/12/27 01:50] – [Hamlib] n6cta
+++ tutorial-packet-on-pi [2026/01/01 07:07] (current) – [Audio - ALSA, maybe PipeWire, not Pulse] n6cta
@@ Line 445: / Line 445: @@
 <code>
-sudo yggdrasil -genconf -json > /etc/yggdrasil/yggdrasil.conf
+yggdrasil -genconf -json > yggdrasil.conf
 </code>
-In the `yggdrasil.conf` file, edit your peers to add:
+In the `yggdrasil.conf` file, edit your peers (typically the second line) to add:
+<code>
   "Peers": ["tls://ip.n6cta.com:60573", "tls://yggdrasil.clitheroe.ca:23277"],
+</code>
 I also strongly advise disabling the multicast interface:
@@ Line 465: / Line 467: @@
   }
+Then copy the file to the correct directory.
+<code>
+sudo cp yggdrasil.conf /etc/yggdrasil/yggdrasil.conf
+</code>
 ===== PBBS Hardening =====
@@ Line 559: / Line 566: @@
 }
-<code>
 pcm.9700RX {
     type dsnoop
@@ Line 584: / Line 590: @@
 }
-pcm.300RX {type rate slave {pcm "plug:RX7300" rate 48000}}
+pcm.300RX {type rate slave {pcm "plug:7300RX" rate 48000}}
-pcm.300TX {type rate slave {pcm "plug:TX7300" rate 48000}}
+pcm.300TX {type rate slave {pcm "plug:7300TX" rate 48000}}
-pcm.1200RX {type rate slave {pcm "plug:RX9700" rate 48000}}
+pcm.1200RX {type rate slave {pcm "plug:9700RX" rate 48000}}
-pcm.1200TX {type rate slave {pcm "plug:TX9700" rate 48000}}
+pcm.1200TX {type rate slave {pcm "plug:9700TX" rate 48000}}
 </code>
 ==== Serial - udev rules ====
@@ Line 756: / Line 762: @@
 WantedBy=multi-user.target
 </code>
+Here the options passed to direwolf are as follows:
+''-a 10'' tells it to report audio levels every 10 seconds, regardless of receiving a packet.
+''-q d'' suppresses messages when decoding APRS packets.
+''-t 0'' disables the text colors, as Direwolf's default is very colorful and can mess up standard terminal colors used elsewhere when it exits incorrectly.
+''-c ...'' tells Direwolf which configuration file to use.  Omitting this will cause it to look for a default file.
 === BBS - linBPQ ===