Differences

This shows you the differences between two versions of the page.

--- tutorial-packet-on-pi [2025/12/31 04:25] – [Yggdrasil] kc2ihx
+++ tutorial-packet-on-pi [2026/01/01 07:07] (current) – [Audio - ALSA, maybe PipeWire, not Pulse] n6cta
@@ Line 566: / Line 566: @@
 }
-<code>
 pcm.9700RX {
     type dsnoop
@@ Line 591: / Line 590: @@
 }
-pcm.300RX {type rate slave {pcm "plug:RX7300" rate 48000}}
+pcm.300RX {type rate slave {pcm "plug:7300RX" rate 48000}}
-pcm.300TX {type rate slave {pcm "plug:TX7300" rate 48000}}
+pcm.300TX {type rate slave {pcm "plug:7300TX" rate 48000}}
-pcm.1200RX {type rate slave {pcm "plug:RX9700" rate 48000}}
+pcm.1200RX {type rate slave {pcm "plug:9700RX" rate 48000}}
-pcm.1200TX {type rate slave {pcm "plug:TX9700" rate 48000}}
+pcm.1200TX {type rate slave {pcm "plug:9700TX" rate 48000}}
 </code>
 ==== Serial - udev rules ====
@@ Line 763: / Line 762: @@
 WantedBy=multi-user.target
 </code>
+Here the options passed to direwolf are as follows:
+''-a 10'' tells it to report audio levels every 10 seconds, regardless of receiving a packet.
+''-q d'' suppresses messages when decoding APRS packets.
+''-t 0'' disables the text colors, as Direwolf's default is very colorful and can mess up standard terminal colors used elsewhere when it exits incorrectly.
+''-c ...'' tells Direwolf which configuration file to use.  Omitting this will cause it to look for a default file.
 === BBS - linBPQ ===