FARPN

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== 857d Radio and Interface Settings ======


===== Radio Settings for HF Packet =====
  * Menu 001: EXT MENU set to ON  
  * Menu 037: DIG GAIN set to 15 (Exact value can be fine tuned here, Signalink TX knob, or PC audio device settings)  
  * Menu 038: DIG MODE set to PSK31-L  
  * Menu 075: RF POWER SET as desired  
  * Multi-Function Row P: Make sure DSP settings are off.

===== Signalink Device Settings =====

Open up the Case by taking out the screws on the front panel, and sliding everything out the front.

  * Install Jumper Wires per manufacturers directions for use with an 857d.
  * Place the jumper across both pins of JP2
  * Place the jumper across both pins of JP4
  * The Jumper should only be on 1 pin of JP3

these instructions and a basic diagram are available here: [[https://www.qsl.net/na4it/slusb/slusb_ft857d.html]]